Filter
Top Products
25-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
EN
FR
ES
Top banner and Bottom banner Fade Out
Setting
When “Top/Bottom Banner Fade Out” is set to “ON,” the Top banner
and Bottom banner on the Audio/Visual Playback screen fade out after 5
seconds if no operation is performed. To display the keys again, touch
the middle of the screen.
• For details of how to set Top/Bottom Banner Fade Out, refer to
“Setting Top banner and Bottom banner Display” (page 40).
Switching Sources
During audio/visual playback, press the (SOURCE) button or touch
a source button in the top banner to switch to the desired source.
Switching Sources Using the (SOURCE) Button
During audio/visual playback, press the (SOURCE) button
repeatedly to switch to the desired source.
Radio Disc*
1
USB/iPod*
1
PANDORA
®
*
1
PANDORA
®
(BLUETOOTH)*
2
SiriusXM*
1
AUX-1*
3
AUX-2*
3
AUX-3*
4
BLUETOOTH AUDIO*
1
Radio…
*
1
When no disc is inserted or no USB memory/iPod/SiriusXM Tuner/
BLUETOOTH compatible devices is connected, this option is not
available.
*
2
When BLUETOOTH Pandora is set to “Off,” this option is not
available.
*
3
When AUX In is set to “Off,” this option is not available.
*
4
When AUX3 In Sel. is set to “iPod Video,” this option is not
available.
Switching Sources Using the Top banner
Touch the source button for the Top banner at the top of the Audio/
Visual Playback screen and select the desired source.
If the source button is hidden, touch [<<] [>>].
• When “Source Layout Setting” (page 50) is set to “On,” you can
switch sources by tracing the middle of the screen from right to left or
from left to right.
This mode is useful if you feel the unit’s display is too bright at night.
To cancel Screen OFF mode, touch the screen or press any button.
• Screen OFF mode is not canceled by Volume UP/DOWN, Mute ON/
OFF.
• Screen OFF mode is canceled when the power or ACC is turned off.
• When the gear lever is shifted to the reverse (R) position while the
rear camera is connected, the rear camera image is displayed.
• When a call is received while a BLUETOOTH device is connected,
the incoming call screen is displayed.
Switching the Dual Screen Display
When you touch on the dual screen during video playback, the
screen size selection message is displayed.
Dual Wide (Initial setting)
Dual Full
Top banner
Bottom banner
Screen Off Function
Source button
Top banner
01GB00INE-W927HD.book Page 25 Thursday, October 4, 2012 5:03 PM