Alpine INE-W927HD GPS Receiver User Manual


 
34-EN
01GB05INE-W927HD.fm
ALPINE INE-W927HD 68-21057Z90-A (EN)
Playing a Disc
1
Press the (SOURCE) button.
2
Touch [Disc] of Top banner.
The display shows the Disc mode screen.
Or insert a disc with the label side facing up. The unit starts
to play the disc.
The reverse side of a double-sided DVD will not be played
automatically.
Remove the disc, turn it over, and reinsert it.
DO NOT insert discs containing maps for the navigation system.
Doing so could result in damage.
Refer also to “Disc Setting” (page 50).
While reading a DivX
®
file, the fast-forwarding/fast-reversing and
repeat functions, etc. cannot be used.
A DivX
®
file that exceeds 4GB cannot be played back.
On DVD mode, menu screens may appear automatically. If this
happens, perform the operation described below to start playback.
Direct Menu Operations
Touch the DVD menu directly.
Menu Operations
1
Touch [Key].
The menu operation mode will be displayed.
Touch [] [] to change the Key panel location
from right to left or vice-versa.
Touch [Return] to return to the previous display.
2
Select a desired menu item by touching [], [],
[] or [].
Touching [] in the operation panel returns to the screen in
step 1.
Touching [Key] displays the Numeric Keypad Input Mode
screen.
For details of the Numeric Keypad Input Mode screen, refer to
“Numeric Keypad Input Operations” (page 35).
3
Touch [Enter] to confirm the selected item.
WARNING
It is dangerous for the driver to watch the DVD/TV/
Video while driving the vehicle. The driver may be
distracted from looking ahead and an accident could
occur.
Install the INE-W927HD correctly so that the driver
cannot watch DVD/TV/Video unless the vehicle is
stopped and the emergency brake is applied.
If the INE-W927HD is not installed correctly, the driver
will be able to watch the DVD/TV/Video while driving
the vehicle and may be distracted from looking ahead
causing an accident. The driver or other people could
be severely injured.
Caution
Not all functions will operate for every DVD. See the
individual DVD’s instructions for details on the
features supported.
Fingerprints on a disc may adversely affect
playback. If a problem occurs, remove the disc and
check for fingerprints on the playback side. Clean
the disc if necessary.
If you switch the power or Ignition key OFF or
change sources during playback, playback will
continue where you left off when you resume
playback.
If you try to perform an invalid operation (based on
the type of disc being played), the following mark is
displayed on the monitor screen:
Play Position Memory Function
Even if you turn power off or switch the Ignition key
to OFF during playback or change the source,
playback will continue from the point where
playback stopped when the power is turned ON
again.
If a Menu Screen Appears
Some operations cannot be performed depending on the disc.
01GB00INE-W927HD.book Page 34 Thursday, October 4, 2012 5:03 PM