81
Playing the Songs
This mode allows you to assign a name of up to five characters to a
song.
1
Press the [ SONG ] button to put the RY20 into Song Mode. Select a song by
rotating the Jog Dial or using the [ +1 ] and [ –1 ] buttons.
2
Select the Name display page by pressing the [PAGE+] button until the
display reads “NAME” and shows the name of the current song. Notice that
the first character is flashing.
The default name for all songs is “-----”.
3
Select the first character of the name by rotating the Jog Dial or by using
the [ +1 ] and [ –1 ] buttons.
4
To move to the next character, press the [ > ] button. The second character
will flash. Change that character by rotating the Jog Dial or by using the
[ +1 ] and [ –1 ] buttons.
5
Repeat the previous step until you have finished creating the name for
your song.
■ Name that Song
NOTE
The RY20 contains the following character set, allowing you to use numbers, upper
and lower case letters and symbols for your name.
(Space)
!”#$%&’()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWX
YZ[¥]^_‘abcdefghijklmnopqrstuvwxyz{|}→←
SONG
A CHASE
SONG
MAIN A
PAD BANK
OTHERS
HH
SD
BD
