92
Modifying the Drum Kits
The range is from “0” to “3”. Depending on the Pad Sensitivity setting (see
page 98), adjusting this setting changes how much the pitch of a voice will
shift up as the velocity with which you tap the drum pad increases.
Pressing the [ +1 ] and [ –1 ] buttons simultaneously resets the pitch
sensitivity to “0”.
You can use the [ < ] and [ > ] cursor buttons to access the “SENS PCH”,
“DRUM KIT” and “PAD” settings.
Decay Sensitivity
The decay of a voice can also be modified by the velocity of the drum
pad tap.
1
Select the Decay Sensitivity parameter by pressing the [PAGE+] or [PAGE–]
buttons. The display reads “SENS” and “DCY”.
2
Press the pad you want to modify after selecting the Pad Bank.
3
Adjust the decay sensitivity of the voice by rotating the Jog Dial or by
using the [ +1 ] and [ –1 ] buttons.
NOTE
If you have selected the Bass Pad Bank, the pitch sensitivity setting applies to all
the pads.
Velocity
Pitch
+3
+2
+1
0
–1 +1
PAGE – PAGE +
PATTERN DRUM KIT
A CHASE
DRUM KIT
PAD
MAIN A
PAD BANK
OTHERS
HH
SD
BD
