Yamaha RY20 Manual

A SERVICE OF

next previous

104

Changing the Effects

The send level is the amount of signal being sent to the DSP for

processing. It is set for each individual drum pad.

1

Select the Send Level display page by pressing the [ PAGE+ ] or [ PAGE– ]

button. The current level flashes under the “SNDLVL” prompt.

2

Press the pad you want to modify.

3

Set the send level by rotating the Jog Dial or by using the [ +1 ] and [ –1 ]

buttons.

The range is from “0” to “7”.

A level of “7” is the maximum signal level and a level of “0” sends no signal

to the DSP.

■ Send Level

HINT

You can also select another drum kit or pad by changing the focus area with the

[ > ] cursor button, then selecting a drum kit or pad by rotating the Jog Dial or by

using the

[ +1 ] and [ –1 ] buttons.

NOTE

You can change the Send Level for the individual pads of the preset drum kits.

Your altered settings will stay in effect until you select another drum kit.

PAGE – PAGE +

PATTERN EFFECT

A CHASE

DRUM KIT

PAD

MAIN A

PAD BANK

OTHERS

HH

SD

BD