6
TROUBLESHOOTING
PROBLEM CORRECTIVE ACTION
Range is completely dead. Check to insure the main store power supply is on.
Check to insure the appliance is wired to power
supply.
Check to insure that the appliance power switch is
on and that switch is not bad.
Oven section elements are dead but top surface Check for proper voltage and connections between
elements are working. oven section circuit breakers and thermostat.
Check to see if the oven breaker has tripped or is
defective.
Check for proper connections to the terminal block
and main power supply.
Top element of the oven section is dead. Check voltage of top oven element infinite switch.
Check for voltage at the top oven element terminals.
Check for defective infinite switch.
Check all wiring associated with the element for
good connections.
Check oven thermostat and wire connections.
Bottom element of oven section is dead. Check oven thermostat and wire connections.
Check for voltage at the bottom oven element
terminals.
Check all wiring associated with the element for
good connections.
French plate or high speed element dead. Check for voltage between H1 and H2 terminals of
the french plate infinite switch in the HI position.
Check for defective element or wire connections.
Check voltage between the L1 and L2 terminals of
the infinite switch. If you have voltage the switch is
bad. If no voltage, check the supply connections to
the L1 and L2 terminals.
Griddle element dead. Check for defective griddle thermostat.
Check for voltage at the griddle element terminals.
Check for bad wire connections of the elements and
thermostat.
Hot top section is dead. Check for defective 4-heat and on-off switches.
Check for element voltage.
Check for bad wire connections of the element, 4-
heat and on-off switches.
Circuit breaker trips as soon as appliance Check for short circuit to ground and between lines.
is turned on. With power off check for resistance between each
line and chassis ground.
With power off check continuity with ohmmeter
between line phases.
