Vulcan Technology 52361 through 52372 Manual

A SERVICE OF

next previous

28

5. Note and disengage element terminal wiring. (Fig. 39)

6. From inside the oven cavity, slip the bottom element out of the mounting clamps. Pull the element through

the oven burner box and cavity area, out of the appliance. (Fig. 40)

7. Install new element by reversing steps 1-6. (When installing new element Do Not force element into

place. Work the mounting clamps around until the element properly seats without force.)

Fig. 39

Fig. 40

ELEMENT CLAMP

ELEMENT