Step 10Step 10
Step 10Step 10
Step 10
Re-install the wheels and torque the lug nuts to your wheel manufacturer’s specifications. It may be
necessary to snug the bolts before lowering the vehicle and then torque the wheels when the car is
on the ground. Alternatively, an assistant may depress the brake pedal while you tighten the wheel
nuts to the proper torque setting.
All trademarks are properties of their respective owners. StopTech LLC is not associated or
affiliated with or sponsored by BMW.
Check wheel to caliper clearance before installing wheels!Check wheel to caliper clearance before installing wheels!
Check wheel to caliper clearance before installing wheels!Check wheel to caliper clearance before installing wheels!
Check wheel to caliper clearance before installing wheels!
Note: Some wheels are balanced on the inside with adhesive backed lead. If theNote: Some wheels are balanced on the inside with adhesive backed lead. If the
Note: Some wheels are balanced on the inside with adhesive backed lead. If theNote: Some wheels are balanced on the inside with adhesive backed lead. If the
Note: Some wheels are balanced on the inside with adhesive backed lead. If the
lead is on the outboarlead is on the outboar
lead is on the outboarlead is on the outboar
lead is on the outboar
d edge, behind the spokes, it may interd edge, behind the spokes, it may inter
d edge, behind the spokes, it may interd edge, behind the spokes, it may inter
d edge, behind the spokes, it may inter
ferfer
ferfer
fer
e with the calipere with the caliper
e with the calipere with the caliper
e with the caliper
..
..
.
If necessarIf necessar
If necessarIf necessar
If necessar
yy
yy
y
, note w, note w
, note w, note w
, note w
eight and location and place a new piece of the same weight and location and place a new piece of the same w
eight and location and place a new piece of the same weight and location and place a new piece of the same w
eight and location and place a new piece of the same w
eighteight
eighteight
eight
furfur
furfur
fur
ther inboarther inboar
ther inboarther inboar
ther inboar
d or outboard or outboar
d or outboard or outboar
d or outboar
d to clear the caliperd to clear the caliper
d to clear the caliperd to clear the caliper
d to clear the caliper
. If y. If y
. If y. If y
. If y
ou rou r
ou rou r
ou r
otate tirotate tir
otate tirotate tir
otate tir
es res r
es res r
es r
egularlyegularly
egularlyegularly
egularly
,,
,,
,
you should check the wheel weight positions on all four wheels and the spare asyou should check the wheel weight positions on all four wheels and the spare as
you should check the wheel weight positions on all four wheels and the spare asyou should check the wheel weight positions on all four wheels and the spare as
you should check the wheel weight positions on all four wheels and the spare as
well if it is full sized.well if it is full sized.
well if it is full sized.well if it is full sized.
well if it is full sized.
Re-install wheelsRe-install wheels
Re-install wheelsRe-install wheels
Re-install wheels
Carefully test-drive the vehicle in a safe area at low speed to insure all components are working
correctly. Then, follow pad and rotor break-in procedures on following pages.
3541 Unit A, Lomita Boulevard, Torrance, CA 90505 (310) 325-4799
www.stoptech.com 20
