A SERVICE OF

logo

18 Setting Up Your 2000i
8. Turn on the DVD player, insert a DVD and press the Play button.
NOTE: Make sure there is no tape in the VCR before you proceed.
1. Connect standard red and white RCA stereo audio cables (not provided) from the RCA Audio
(or Audio OUT) outputs on the DVD player to the RCA Audio (or Audio IN) inputs on the
VCR. Keep your right and left channel connections correct for stereo sound.
2. Connect standard red and white RCA stereo audio cables (not provided) from the RCA Audio
(or Audio OUT) outputs on the VCR to the two Auxiliary Audio IN jacks on the rear of the
2000i. Keep your right and left channel connections correct for stereo sound.
When you switch video sources, the audio source for the cabinet speakers will also switch.
To link VCR and DVD player audio connections
DVD Player
VCR
RCA Outputs
RCA Inputs
RCA Outputs
To Auxiliary Audio IN
jacks on rear of
2000i
Computer 2
Audio
Auxiliary
Audio In
Audio
Out
Computer 2
Audio
Auxiliary
Audio In
Audio
Out
Connect red and white RCA
audio cables here