Unit 4: Operation
SATO M5900RVe Operator Manual PN 9001125A Page 4-20
CARD->MEMORYCOPY
SATO FONT
Allows the copying of SATO Font in Flash ROM. LINE key
moves the cursor and the FEED key selects the option.
CARD->MEMORYCOPY
ALL
Allows the copying of the entire card contents into Flash ROM.
LINE key moves the cursor and the FEED key selects the
option.
MEMORY->CARDCOPY
ALL
Allows the copying of the entire contents of the Flash ROM or
firmware. A 4MB card or greater is required. An error occurs if
an insufficient memory card is used.
CARD->MEMORYCOPY
PROGRAM
Allows corying of Firmware program. Can overwrite the
Firmware program card in program ROM. A program card is
created by copying to the memory card of the Firmware
mentioned later.
MEMORY->CARDCOPY
PROGRAM Y/N
Allows copying of the Firmware program in the memory card. A
2MB card or greater is required. LINE key moves the cursor and
the FEED key selects the option.
CARD FORMAT Allows formatting of the memory card and to clear all internal
contents. LINE key moves the cursor and the FEED key selects
the option.
MEMORY FORMAT Allows formatting of Flash ROM memory. LINE key moves the
cursor and the FEED key selects the option.
START Initiates the copying or formatting activity. LINE key moves the
cursor and the FEED key selects the option.
COPYING Displays that the copying or formatting activity is underway.
COMPLETED Displays that the copying or formatting activity is complete.
After 3 seconds of display, returns to the original screen.
CARD COPY/FORMAT
ERROR
Displays if the copying or formatting activity incuured an error
and could not complete. The FEED key returns the display to
the original screen.
CARD ID ERROR Displays when the incorrect card has been selected. The FEED
key returns the display to the original screen.
SERVICE MODE
MENU DESCRIPTION
GAP x.xV
INPUT x.xV
Sets slice level. Sets the slice level at intervals of 0-3.2V. When
the value is set at 0, auto setting is done through the firmware
software. LINE key moves the cursor and the FEED key selects
the option.
AUTO ONLINE FEED
YES NO
Sets the default feed. Sets whether to automatically feed paper
in ONLINE mode after startup. The defualt position is NO: do
not feed paper. LINE key moves the cursor and the FEED key
selects the option.
CARD MODE
MENU DESCRIPTION
