A SERVICE OF

logo

Unit 4: Operation
SATO M5900RVe Operator Manual PN 9001125A Page 4-6
CONFIGURATION MODES
This chapter provides an overview of the various configuration modes of the operation menu. With
exception of the Power switch located on the back side of the printer, all of the following
configuration activities are performed via the use of the operator panel located on the printer front.
Many settings may also be controlled via software commands. In the case of conflict between the
software and control panel settings, the printer will always use the last entered valid setting.
NORMAL MODE
When a print job is received, the LCD will display the number of labels to be printed and will
numerically descend as each label is printed.
Figure 4-1, Normal Mode
Offline/User Mode
PRINT DARKNESS
1 2 3 4 5
LINE & FEED
together
Cursor moves
each time LINE is
pressed.
ONLINE
QTY: 000000
POWER = ON
LINE
FEED
PRINT SPEED
2 3 4 5 6
Cursor moves
each time LINE is
pressed.
FEED
PITCH OFFSET
+00mm
LINE
key changes
value. FEED key
moves from one
field to
another.
FEED
CANCEL PRINT JOB
YES NO
Cursor moves
each time LINE
is pressed.
YES/NO
LINE
OFFLINE
000000
LINE
FEED
Feeds
blank label each
time is
pressed.
LINE
OFFLINE
000000