Unit 4: Printer Configuration
CL408-412e Supplemental Manual
4-24 PN: 9001159A
PROTOCOL INITIALIZATION MODE (TABLE 4-6)
MENU DESCRIPTION
Initialization is automatic when the proper keys and switches are activated. This is the
only screen that will appear and will indicate that non-standard protocol code to be
returned to the default value. The default value is: STX (7BH), ETX (7DH), ESC (5EH),
ENQ (40H), NULL (7EH), CAN (21H), Offline (5DH), EuroCode (D5H).
COUNTERS MODE (TABLE 4-7)
MENU DESCRIPTION
Is the first menu screen of the Advanced Mode. The Advanced Mode is provided to make basic
printer operational adjustments. Typically, once these adjustments or settings have been made,
they will not require additional address unless a new bob is downloaded.
Is only a transitional menu screen to access the Counters Mode.
The Card Mode allows the operator to manage or format the expanded memory card. Is only a
transitional menu screen to access the Counters Mode.
The Service Mode allows the programming of various dimensional settings, sensor thresholds,
and language options.
Is only a transitional menu screen to access the Counters Mode.
Is the first menu screen of the Counters Mode. The Counters Mode allows the printers various
internal counters to be reset to zero or to view count in meters printed thus far.
Allows the selection of which counter to be viewed to reset.
Is an informational screen that provides the printed length of media using the existing print head.
The head counter should be reset each time the print head is replaced.
Is an informational screen that provides the dispense cycles of media since dispenser installation
or use.
Is an informational screen that provides the cut cycles of media since cutter installation or use.
Is an informational screen that provides the printed the length of media since printer setup.
ALT. PROTOCOL
DEFAULT COMPLETE
ADVANCED MODE
CARD MODE
SERVICE MODE
COUNTERS MODE
COUNTERS
HD DSP CUT LIFE
HEAD COUNTER
XX.XM
DISPENSE COUNTER
XX.XM
CUT COUNTER
X
LIFE COUNTER
XX.XM
