Unit 4: Printer Configuration
CL408-412e Supplemental Manual
4-19 PN: 9001159A
MENU DEFINITION TABLES
NORMAL MODE (TABLE 4-1)
MENU DESCRIPTION
Displays the printer’s operational status. The ONLINE status is displayed on the top line and the
label quantity status is on the bottom. The message will be changed to OFFLINE whenever the
printer is switched offline by pressing the LINE key. When a print job is received, the quantity line
will indicate the number of labels to be printed. As the label job prints, the display status indicates
the quantity of labels remaining to be printed.
Displays the printer’s operational status. The OFFLINE status is displayed on the top line and the
label quantity status is on the bottom. The message will be changed to ONLINE whenever the
printer is switched online by pressing the LINE key.
Permits the adjustment of print density. Higher print density equates to darker pint images.
Permits the printer’s printing speed to be established based on inches per second (IPS).
The label pitch is the distance from the leading edge (the edge that comes out of the printer first)
of a label and the leading edge of the next label. Once the position has been set, it can be fine
adjusted using the PITCH potentiometer.
Positive (+) digit settings moves the leading edge forward and away from the print head while a
negative (-) setting moves the label’s leading edge incrementally back into the mechanism.
Print data that has previously been received, can be cleared. If YES is selected, the print data will
be deleted and then the printer will go offline. If the NO option is selected, the printer will go offline
without deleting data in buffer.
ADVANCED MODE (TABLE 4-2)
MENU DESCRIPTION
Is the first menu screen of the Advanced Mode. The Advanced Mode is provided to make basic
printer operational adjustments. Typically, once these adjustments or settings have been made,
they will not require additional address unless a new bob is downloaded.
Allows the darkness (print density) selection of the printed image. Has two selection options.
This menu allows for the printer to be configured to print zeros with or without a diagonal slash
through them. This will apply to all font types with the exception of Kanji font.
ONLINE
QTY: XXXXXX
OFFLINE
QTY: XXXXXX
PRINT DARKNESS
1 2 3 4 5
PRINT SPEED
2 3 4 5 6
PITCH OFFSET
+00MM
CANCEL PRINT JOB
YES NO
ADVANCED MODE
DARKNESS RANGE
A B
ZERO SLASH
YES NO
