Unit 4: Printer Configuration
CL408-412e Supplemental Manual
4-21 PN: 9001159A
SERVICE MODE (TABLE 4-4)
MENU DESCRIPTION
Is the first menu screen of the Advanced Mode. The Advanced Mode is provided to make basic
printer operational adjustments. Typically, once these adjustments or settings have been made,
they will not require additional address unless a new bob is downloaded.
Is only a transitional menu screen to access the Service Mode.
The Card Mode allows the operator to manage or format the expanded memory card. Is only a
transitional menu screen to access the Service Mode.
The Service Mode allows the programming of various dimensional settings, sensor thresholds,
and language options.
When setting the sensor threshold, the voltage shown on the top line is the measurement using
only the media’s backing paper placed over the sensor. The lower line displays the measurement
with the media and backing paper combined.
DSW2-2 determines which sensor will be enabled for use.
Allows it to be determined if the printer will feed a label when it is placed online to ensure proper
media placement for printing.
Allows it to be determined if the printer will feed a label when an error condition is cleared.
Allows it to be determined if the printer will print the last label in memory when the FEED key is
pressed in the normal, online mode.
Allows the selection of whether to accept the default setting or to set the backfed distance other
than the default setting.
Allows the backfeed distance to be set. If using thermal transfer for printing, set the feed distance
less than 30mm to avoid detection of the ribbon end by accident.
Allows selection of the conditions that regulates Pin-9 of the EXT connector. MODE1 enables
Pin-9 when the printer goes online and a print quantity is displayed. MODE2 enables Pin-9 when
the printer goes online without consideration of print quantity.
Allows the hexadecimal value to be specified for the character replaced with the Euro Character.
The default is D5H. ASCII (213)
ADVANCED MODE
CARD MODE
SERVICE MODE
GAP [ X.XV ]
INPUT [ X.XV ]
AUTO ONLINE FEED
YES NO
FEED ON ERROR
YES NO
REPRINT W/FEED
YES NO
FORWARD / BACKFEED
DISTANCE DEFAULT
FORWARD / BACKFEED
DISTANCE XXXMM
EXT PIN9 SELECET
MODE1 MODE2
EURO CODE
D5
