8
FEATURES / SPECIFICATIONS MODEL R76LT / R76ATR / R76ATRF
Type of Drive System Air / Electric
R76LT/R76ATR Motor Dual Voltage 110/220V 50/60HZ 1 Ph.
R76ATF Motor 220V 50/60HZ 1Ph.
Air Requirement 140-165 PSI (10-11 BAR)
Wheel Clamping Method 4 Rim-Guard Clamps - Internal / External
Table Clamping System Dual Pneumatic Cylinders
Bead Breaking System Pneumatic Blade / Dual Settings
Turntable Speed -360-Degree Rotation 6.5 Seconds
Tool Holder Pneumatic Lock
Adjustable Turntable Clamps Standard
Inflation System Standard
Inflation Pressure Regulator/Limiter Standard
Water Filter Standard
Oiler / Lubricator Standard
Air Regulators
Standard
Bead Lifting Tool Standard
Large Soap / Lubricator Bucket Standard
Brush Standard
Tower Design Tilt Back
Powerful "Turbo -Blast" Bead Seating System Standard
Tire Inflation Standard
Tool Tray / Bin Storage Standard
Internal Wheel clamping Capacity * 10.25" – 30.25" (260 mm – 768 mm)
External Wheel clamping Capacity * 8.25" – 28.25" (209 mm – 717 mm)
Turntable Tire Width Capacity (Mounting) 4.5" – 17.5" (114 mm – 444 mm)
Bead Breaker Tire Width Capacity (Demounting) 1" – 16" (25 mm – 406 mm)
Maximum Tire Diameter 44" (1118 mm)
Shipping Weight R76LT: 722 lbs. / R76ATR: 924 lbs. / R76ATRF: 910 lbs.
Specifications are subject to change without notice.
* NOTE: Internal and External Wheel clamping dimensions do not translate directly to rim or tire sizes as Wheel
clamping points may vary by manufacturer.
SECTION 5
FEATURES / SPECIFICATIONS: MODEL R76LT / R76ATR / R76ATRF
Tools required.
1. Pallet jack or forklift for moving crate.
2. Shop crane.
3 Utility knife.
4. Crow bar or pry bar.
5. Tin Snips or Sheet Metal Snips
6. Hammer.
7. Open end metric wrenches and/or socket set.
8. Phillips and Slot head screw drivers.
9. Metric Allen Key set.
Parts required but not supplied.
1. Teflon tape
2. Air fitting to match shop Air Supply line.
3. Tool Oil.
4. Anchor Bolts and Shims (if Anchoring)
