COMSPHERE 6800 Series Network Management System
7-28 January 1997 6800-A2-GN22-30
7. To initialize the NMS database,
TYPE: y
PRESS: Enter
The following message appears:
WARNING: Initializing the NMS database will replace it with default values.
Hit <Enter> to continue or <q> to quit:
8. To continue with the migration process,
PRESS: Enter
9. The menu shown in Figure 7-5 will appear. If there is a database from Release 3.0 or 3.1
to be converted to Release 4.2 format,
TYPE: 3
PRESS: Enter
to select Include Migration Data. The following message appears:
Do you wish to include migration data from a previous NMS? (y/n) [n]:
10. To proceed,
TYPE: y
PRESS: Enter
The following message appears:
Enter the previous NMS type (sc, r1, r2, r3, r3.1, r4, r4.1):
11. Enter the appropriate type,
TYPE: r3 or r3.1 as appropriate
PRESS: Enter
