A SERVICE OF

logo

Using the protocols
2-24 PagePrinter Network Adapter: Utilities & Environments
Updating the adapter’s firmware
To update the adapter’s firmware, you send a file to the adapter’s flash
memory, overwriting the existing flash memory. This process is also
known as flashing the adapter.
You can update the firmware by using TFTP.
To use TFTP, do the following:
1 Get the flash file you need by contacting your vendor.
2 Do NOT turn off (or reset) the adapter or printer during the flash
process.
This may damage the adapter. The adapter resets itself after
the flash process is finished.
3 TFTP the file to this destination: /dev/flash.