Configuring the adapter
3-10 PagePrinter Network Adapter: Utilities & Environments
How to print Point to Point:
1 Create the printer object:
a In Windows 95, click Start, then click Settings, then Printers.
b Double-click Add Printer to define the printer you want to use.
c Choose LOCAL (not NETWORK) printer.
d Select the appropriate manufacturer and printer.
e Choose any port (LPT or COM or FILE). Later you change the port to
a logical network port.
2 Assign the printer object to the physical printer.
a After the printer object is added to your printer container, highlight
it’s icon. Optionally, double click on it with the right mouse button.
b Click File, then Properties, then Details tab, then Add Port.
c Click Others, then click Network Printer Monitor, then click OK.
d Select the printer you want to use. The printer list was generated using
MarkVision.
e Specify a logical port name to assign to the printer. Use a port name that
is meaningful to you. Click OK.
3 Print
a To print a test page, use Windows 95, then Start, then Settings, then
Printer, then File, then Properties, then General tab, then Print Test
Page.
b To print from a Windows application, select Print as usual.
Note: You can not print from DOS.
