Copying on letterhead
1 Load an original document facedown into the ADF or on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 From the home screen, navigate to:
Copy > Copy from > specify the size of the original document > Copy to > Manual Feeder
4 If you are printing on one side of the letterhead and using a finisher, then place the letterhead faceup, top edge
first in the multipurpose feeder.
Note: For the proper letterhead orientation, see
“Loading the multipurpose feeder” on page 76.
5 Select the size of the letterxhead.
6 Navigate to:
Continue > Letterhead > Continue > Copy It
Customizing copy settings
Copying to a different size
1 Load an original document facedown into the ADF or on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2 If you are loading a document into the ADF, then adjust the paper guides.
3 On the home screen, touch Copy.
4 Touch Copy from > select the size of the original document > .
5 Touch Copy to > select the size of the copy > .
6 Touch Copy It.
Making copies using paper from a selected tray
1 Load an original document facedown, long edge first into the ADF tray or facedown on the scanner glass.
Notes:
• Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF tray. Place these items on the scanner glass.
• The ADF indicator light comes on when the paper is loaded properly.
2 If you are loading a document into the ADF tray, then adjust the paper guides.
Copying 103
