A SERVICE OF

logo

206
Chapter 11 Novell LineJet Print Server Configuration (10/100Base-T)
Manual (Telnet) Method
1. Telnet to the print server. This will bring up a login screen:
telnet
ipaddress
2. You should now see a prompt displayed that has the LineJet Print
Server’s IP address followed by a colon then
root
.
ipaddress
:root>
3. At the prompt, enter:
store pserver novell tree
tree
4. Reset the unit to make the changes take effect.
reset
Note
If prompted for a User ID and password first, type in
root
for the ID and
press ENTER at the password prompt since there is no password by
default.