A SERVICE OF

logo

Open as PDF
next previous
Command
ASCII Command
(host to unit)
Response
(unit to host)
Additional
Description
Direct access port
Set direct access
port map
E [
port#
]
MD
}
Pmd
[
port#
]] Set serial pass-through port
number.
Reset direct access
port map
E
2001MD
}
Pmd 2001
] Reset serial pass-through
port.
Disable direct access
port
E
0MD
}
Pmd 00000
]
Disable serial pass-through
port.
View direct access
port map
E
MD
}
[
port#
]] View serial pass-through
port.
Restart network
Restart network
E
2BOOT
}
2BOOT
]
NOTE: Changes made to the IP address, subnet mask, HDCP, host name, and gateway address do not take effect on
Linux systems until the 2BOOT command is issued.
Changes made using the CISG command take place immediately.
Command and Response Table for Basic SIS Commands (continued)
70SMD101 • Remote Communication and Control