4-3
Printing with EPSON Stylus RIP for Windows
2. Choose the
EPSON Stylus RIP
printer driver from the
print dialog box. The Where: field changes from
LTP1 to
StylusRIP
or
File
.
3. If you want to change any printer options before printing,
see the next section for instructions.
4. If you’re ready to print with the default options, click
OK
.
After a few moments, the Stylus RIP window displays its print
queue and printer status messages, and then sends the
document to your printer. See page 4-8 for details.
Printing and Setting Printer Options
You can change several printer options, such as paper size and
type, print resolution, or specific PostScript options before you
print.
Note:
The actual Properties dialog boxes differ between
Windows 95/98/2000 and Windows NT, but each allows
you to change the same options.
The printer port
changes from
LPT1 to StylusRIP
or File
Select the EPSON
Stylus RIP printer
driver here . . .
Click here to
change any print
job or printer
options
Nflight.bk Page 3 Friday, September 1, 2000 8:32 AM
