3-13
Installing EPSON Stylus RIP for Windows
ICC Support
For Windows 95/98/2000 and Windows NT 4.0 ICM
support, use the ICC profiles that are included with the
EPSON Stylus RIP software. (Your application must also
support Windows color matching to use ICC profile
information.)
When you install the EPSON Stylus RIP software, the ICC
profiles are copied into Stylus RIP Utilities folder:
Program Files\EPSON\Stylus RIP\Stylus RIP_Utilities\
ICC_PROFILE
.
To use the profiles with Windows 95, you must manually copy
the profiles to this folder:
C:\Windows\System\Color
.
Under Windows 98, Windows 2000, and Windows NT 4.0,
the profiles are automatically copied to the appropriate folders
when you install Stylus RIP.
For more information, see the Readme file in the
Program Files\EPSON\Stylus RIP\Stylus
RIP_Utilities\ICC_PROFILE
directory.
Note:
You should install an ICC profile for all your input/output devices to
achieve successful color matching. In addition, you may need to
copy your profiles to other locations depending on the applications
you use. Refer to your application’s documentation for instructions
on using ICM.
Nflight.bk Page 13 Friday, September 1, 2000 8:32 AM
