Printable area
Area measurements:
Pre-printed paper
Pre-printed paper is paper with white space in the middle and ruled lines,
letters, or figures printed in the top and bottom margins. The margins are
printed the first time the paper is loaded in the printer, and a document is
printed in the white space the second time the paper is loaded in the
printer. The margin areas are often used for letterheads, borders, and so
on. You can make your own pre-printed paper or you can purchase it.
You cannot preprint in the area with the diagonal shading shown in the
illustrations below, and you can preprint only with colors whose
reflectivity is under 60% (for instance black). Avoid punching holes in the
restricted area shown below because punctures are also recognized as
colors whose reflectivity is under 60%.
printable area
on a label
B
B
F
E
F
E
DD
C
C
A
A
A 19 mm (0.748 inch) or more
B 21.2 mm (0.83 inch) or more
C 12.5 mm (0.49 inch) or more
D 65 mm (2.56 inches) or more
E 2 mm (0.08 inch) or more
F 5 mm (0.2 inch) or more
G 4.2 mm (0.165 inch) or more
G
label
Me-302
L
Peony Rev.C
A5 size Appendix A
98/01/07 pass 4
A-12 Specifications
