xStack
®
DES-3200 Series Layer 2 Managed Fast Ethernet Switch CLI Reference Guide
476
DES-3200-28/ME:admin#show poe system
Command: show poe system
PoE System Information
---------------------------------------------------
Power Limit : 188(Watts)
Power Consumption : 0(Watts)
Power Remained : 169(Watts)
Power Disconnection Method : Deny Next Port
Detection Legacy PD : Disabled
If Power Disconnection Method is set to deny next port, then the system can not
utilize out of its maximum power capacity. The maximum unused watt is 19W.
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
53-4 show poe ports
Description
This command is used to display the setting and actual values of PoE port.
Format
show poe ports {<portlist>}
Parameters
<portlist> - (Optional) Specify a list of ports to be displayed.
If no parameter specified, the system will display the status for all ports.
Restrictions
None.
Example
To display PoE port:
