1124 PowerConnect B-Series FCX Configuration Guide
53-1002266-01
Displaying VRRP and VRRPE information
31
This example is for a VRRP Owner. Here is an example for a VRRP Backup.
Here is an example for a VRRPE Backup.
Syntax: show ip vrrp brief | ethernet [<slotnum>/]<portnum> | ve <num> | stat
PowerConnect#show ip vrrp
Total number of VRRP routers defined: 1
Interface ethernet 1/6
auth-type no authentication
VRID 1
state master
administrative-status enabled
mode owner
priority 255
current priority 255
hello-interval 10000 msec
advertise backup: disabled
track-port 2/4
PowerConnect#show ip vrrp
Total number of VRRP routers defined: 1
Interface ethernet 1/5
auth-type no authentication
VRID 1
state backup
administrative-status enabled
mode non-owner(backup)
priority 100
current priority 100
hello-interval 10000 msec
dead-interval 30000 msec
current dead-interval 10000 msec
preempt-mode true
advertise backup: enabled
backup router 192.53.5.3 expires in 00:00:03.0
next hello sent in 00:00:02.0
track-port 3/2
PowerConnect#show ip vrrp-extended
Total number of VRRP-Extended routers defined: 1
Interface ethernet 1/6
auth-type no authentication
VRID 1
state master
administrative-status enabled
priority 200
current priority 200
hello-interval 10000 msec
dead-interval 30000 msec
current dead-interval 30000 msec
preempt-mode true
virtual ip address 192.53.5.254
advertise backup: enabled
master router 192.53.5.2 expires in 00:00:03.0
track-port 2/4
