Option Description
UEFI Compliance
Version
Displays the UEFI compliance level of the system firmware.
Memory Settings screen
You can use the Memory Settings screen to view all the memory settings and enable or disable specific
memory functions, such as system memory testing and node interleaving.
To view the Memory Setting screen, click System Setup Main Menu → System BIOS → Memory Settings.
The Memory Settings screen details are explained as follows:
Option Description
System Memory
Size
Displays the amount of memory installed in the system.
System Memory
Type
Displays the type of memory installed in the system.
System Memory
Speed
Displays the system memory speed.
System Memory
Voltage
Displays the system memory voltage.
Video Memory Displays the amount of video memory.
System Memory
Testing
Specifies whether the system memory tests are run during system boot. Options
are Enabled and Disabled. This option is set to Disabled by default.
Memory
Operating Mode
Specifies the memory operating mode. The options available are Optimizer Mode,
Advanced ECC Mode, Mirror Mode, Spare Mode, Spare with Advanced ECC Mode,
and Dell Fault Resilient Mode. This option is set to Optimizer Mode by default.
NOTE: The Memory Operating Mode can have different default and available
options based on the memory configuration of your system.
NOTE: The Dell Fault Resilient Mode establishes an area of memory that is
fault resilient. This mode can be used by an operating system that supports the
feature to load critical applications or enables the operating system kernel to
maximize system availability.
Node Interleaving Specifies if Non-Uniform Memory architecture (NUMA) is supported. If this field is
set to Enabled, memory interleaving is supported if a symmetric memory
configuration is installed. If the field is set to Disabled, the system supports NUMA
(asymmetric) memory configurations. This option is set to Disabled by default.
Snoop Mode Specifies the Snoop Mode options. The Snoop Mode options available are Home
Snoop, Early Snoop, and Cluster on Die. This option is set to Early Snoop by
default. This field is available only when the Node Interleaving is set to Disabled.
Processor Settings screen
You can use the Processor Settings screen to view the processor settings and perform specific functions
such as enabling virtualization technology, hardware prefetcher, and logical processor idling.
To view the Processor Settings screen click the System Setup Main Menu → System BIOS → Processor
Settings.
31
