Drive-status indicator pattern (RAID only) Condition
Blinks amber four times per second Drive failed
Blinks green slowly Drive rebuilding
Steady green Drive online
Blinks green three seconds, amber three
seconds, and turns off six seconds
Rebuild aborted
iDRAC Direct LED indicator codes
NOTE: The iDRAC Direct LED indicator does not light up for the USB mode.
Figure 5. iDRAC Direct LED indicator
1. iDRAC Direct status indicator
The following table displays iDRAC Direct activity when configuring iDRAC Direct by using the
management port (USB XML Import).
Convention iDRAC Direct
LED indicator
pattern
Condition
A Green Lights green for a minimum of two seconds at the beginning and
end of a file transfer.
B Flashing green Indicates file transfer or any operation tasks.
C Green and turns
off
Indicates that the file transfer is complete.
D Not lit Indicates that the USB is ready to be removed or that a task is
complete.
The following table displays iDRAC Direct activity when configuring iDRAC Direct by using your laptop
and cable (Laptop Connect).
16
