448 | SecureEnterpriseMesh DellPowerConnectW-SeriesArubaOS6.2 | User Guide
Figure 131: Sample High-Availability Deployment
Planning a WLAN According to Your Specifications
Review the following steps to create a building model and plan the WLAN for your model.
Task Overview
1. Gather information about your building’s dimensions and floor plan.
2. Determine the level of coverage you want for your APs and AMs.
3. Create a new building and add its dimensions.
4. Enter the parameters of your AP coverage.
5. Enter the parameters of your AM coverage.
6. Add floors to your building and import the floor plans.
7. Define special areas.
8. Generate suggested AP and AM tables by executing the AP/AM Plan features.
Collecting Required Information
You should collect the following information before using RF Plan. Having this information readily available will
expedite your planning efforts.
l Building dimensions
l Number of floors
l Distance between floors
l Number of users and number of users per AP
l Radio type(s)
l Overlap Factor
