A SERVICE OF

logo

Open as PDF
next previous
P-97
QT-2100 Programming Manual
4-2-5-4 Programming function control 1 by range
Operation
5. Select “4. Allowed function 1” and press the <YES> key.
6. Select an appropriate record and press the <YES>/<NO>
key.
7. After programming, press the <ESC> key to proceed to the
next step.
8. Enter the start range No. and press the <YES> key.
(It starts “0001” if you skip to enter the start range.)
Then enter the end range No. and press the <YES> key.
(It ends the last record if you skip to enter the end range.)
9. Press the <YES> key.
10. Press the <ESC> key to return to the previous menu.
Allowed function 1
Cash YES
Charge YES
Check YES
Credit YES
New Balance YES
Price Inquiry YES
Stock Inquiry YES
Operate Character Recall YES
Character Print YES
Check Print YES
Clerk Transfer YESv
0.00
Allowed function 1
Table Transfer YES^
Tip YES
Normal Receipt YES
Loan YES
Received on Account YES
Paid Out YES
Pick Up YES
Coupon YES
Deposit YES
Minus YES
% Minus YESv
0.00
Allowed function 1
Received on Account YES^
Paid Out YES
Pick Up YES
Coupon YES
Deposit YES
Minus YES
% Minus YES
Plus YES
% Plus YES
Refund YES
Coupon2 YES
0.00
Range
Operation
1.Clerk Control
2.Menu Shift/2nd@
3.Mode Control
4.Allowed function 1
5.Allowed function 2
6.Allowed function 3
7.Allowed function 4
8.Allowed function 5 v
0.00
Allowed function 1
Enter Start range 0
End range 0
OK? YES
0.00
Allowed function 1
Enter Start range 1
End range 99
OK? YES
0.00