A SERVICE OF

logo

Open as PDF
next previous
P-147
QT-2100 Programming Manual
7. Enter the start range No. and press the <YES> key.
(It starts “0001” if you skip to enter the start range.)
Then enter the end range No. and press the <YES> key.
(It ends the last record if you skip to enter the end range.)
8. Press the <YES> key and return to the previous menu.
5-2-6 Copying PLU descriptors to PLU 2nd unit price
Operation
4. Select “6. PLU –> 2nd@ Copy” and press the <YES> key.
5. Enter the start range No. and press the <YES> key.
(It starts “0001” if you skip to enter the start range.)
Then enter the end range No. and press the <YES> key.
(It ends the last record if you skip to enter the end range.)
Item Descriptor
Descriptor PLU0123
Enter Start range 123
End range 0
OK? YES
0.00
Item Descriptor
Descriptor PLU0123
Enter Start range 123
End range 999
OK? YES
0.00
Item Descriptor
Item Descriptor
1.PLU
2.PLU 2nd@
3.Sub-Department
4.Department
5.Range
6.PLU -> 2nd@ Copy
7.Char & Press Key
0.00
Item Descriptor
PLU -> 2nd@ Copy
Enter Start range 123
End range 0
OK? YES
0.00