64
PQ-8P, PQ-8S
Table 5-6 (continued). Settings for Different Print Orientations.
PQ-8 Setting for
Print
Result Host Setting APO Orientation
Print all reports/ Degree of Page OFF Portrait
documents in Rotation....
portrait with *AUTO; Rotate
requested font Paper....=1
(Automatic)
5.8.4 C
HANGING
P
AGE
-R
OTATION
S
ETTINGS
Before changing page-rotation
settings, first verify the current
settings. In Office Vision/400 and
DisplayWrite/36, page rotation
settings can be viewed and changed
in the following manner:
1.Press F20 “Format options.”
2.Press 1 “Document options”
then ENTER.
3.Press 1 “Document format” then
ENTER.
4.Press 4 “Page layout/paper
options” then ENTER.
5.Press Page Down to scroll to the
second screen.
6.Locate the “Rotate Paper ....”
option.
7.Move the cursor to the currently
selected rotation setting and
type in the desired selection.
To permanently change the page-
rotation setting for a data processing
report the print file must be
changed. This should be done by an
MIS staff member, since a changed
print file most likely affects many
printers. The page-rotation setting
can be changed temporarily by
overriding the print file. The print
file must be changed or overridden
before the host creates the print job.
An overridden print file applies only
to print jobs created on the host
session that was active when the
print file was overridden.
To view the current print file
settings, type CHGPRTF followed by
a space and the name of the print
file on the command line of the
host. Press F4. Do not change any
settings unless authorized by the IS
director.
