127
PQ-8P, PQ-8S
7.5 Problem Resolution Guide
Table 7-2 is a general guide to
resolve common problems that may
occur. Please refer to this guide
before contacting technical support.
Table 7-2. Problem Resolution Guide.
Problem or Message Probable Cause Action
Host Line Sync LED Host is not Make sure the host is
is not on when configured for a printer properly configured for the
connected to the host at the address specified printer.
Host is not operating Check host system.
Damaged or improper Check host cabling for
cabling damage or improper
connection.
Twinax cable Make sure the prior device
improperly terminated is not terminated (some PC
emulator cards may terminate
mid-line).
Twisted pair cabling Activate Star Panel Overdrive
is not attached to an (front panel or host/PC
“active” or boosted download command 20).
hub
Host Line Sync LED Address conflict with Make sure no other devices
blinks on and off another twinax device on this cable have the same
on the cable address.
