SERVSELECT™ IP INSTALLER/USER GUIDE
30
CHAPTER 4: ANALOG PORT OPERATION
31
4.7 Displaying Version Information
The OSD enables you to display the ServSelect IP and SAM firmware versions. For
optimum performance, keep your firmware current. For more information, see Appendix A.
To display version information:
1. Press Print Screen. The Main dialog box will appear.
2. Click Commands - Display Versions. The Version dialog box appears. The top
half of the box lists the subsystem versions in the appliance.
Figure 4-12. Version Dialog Box
3. Click Digital to view the Digitizer unit rmware versions. The Digital Version
dialog box appears. The top section identies the Digitizer subsystem versions.
The center section identies the current network settings. Click X or press
Escape to return to the Version dialog box.
Figure 4-13. Digital Version Dialog Box
4. Click SAM (see Figure 4-12) to view individual SAM version information. The
SAM Selection dialog box appears.
