6. GUI orientation
Image 6-56
Once the two k eyframes are defined, the PIP can move between the two positions by pressing the green arrow bu ttons. The rate
for the movement is adjusted by changing the number in the corresponding box.
Any of the two keyframes c an be deleted when the keyframe is highlighted and by pressing the “Delete K F” button.
The red LED in the k eyframe button indicates the cu rrent position of the PIP.
Layer adjustment panel > Main adjustment
The Main adjustment panel is variable according the Layer type.
Layer type = PIP (Border Tab):
This menu allows users to adjust the PIP borders.
• Borders are enabled by selecting the type of to apply. Six
types are available:
-Hard
-Soft
-Halo
- Halo-in
- Halo-out
• Border width and color are selected by adjusting the
corresponding sliders or entering a figure in the adjacent
edit boxes. The border width can be entered either in
Percentage of the vertical size or in pixels.
• The s elected color is shown in the Current Color bar. The
color can also be stored by clicking in one of the square
boxes at the bottom of the menu next to t he Learn button.
These boxes are quick sho rtcuts to select that color for
the Border.
• Another way to specify a color is to click on the Color
wheel. The slider values will change accordingly a s the
mouse moves around the color wheel.
• Learn: The “Learn” button in the bottom is a way to store
custom colors to be used for later. The way to use this
area is to:
a) Pick a color to save, using color wheel or the R/G/B
adjustments.
b) Click Lear n button.
c) Click any one of the buttons on the right.
d) The color that was picked is now stored in this button.
Lay e r type = PIP (Sha dow Tab):
The Shadow Menu enables the user to plac e a sha dow behind a PIP.
122
R5905948 E2 12/12/2014
