5. Advanced operation
5. Set the OSD horizontal position as desired and confirm.
5.4.5.2 OSD Vertical Position
To adjust the OSD vertical position
1. Bring up the OSD main menu.
2. Navigate to the Configuration menu.
3. Enter the OSD setting submenu.
4. Select OSD Ver. Pos.
The command bar OSD Ver. Pos. is highlighted.
5. Set the OSD vertical position as desired and confirm.
5.4.5.3 O SD Time-out
About OSD time-out
The available OSD time-out values for your display are:
•10Sec.
•20Sec.
•30Sec.
•60Sec.
•Disabled(=5minutes)
To adjust the OSD time-out
1. Bring up the OSD main menu.
2. Navigate to the Configuration menu.
3. Enter the OSD setting submenu.
4. Select OSD Time-out
5. Select one of the available OSD time-out values and confirm.
5.4.6 Recall Profile
About recalling profiles
To recall a profile means to restore the default factory settings (Factory and X Ray profiles) or recall the
use defined profiles.
Theavailableprofiles to recall from your display are:
•Factory
•XRay
•User1
•User2
•User3
To recall a profile
1. Bring up the OSD main menu.
2. Navigate to the Configuration menu.
3. Enter the Recall Profile submenu.
44
(451920610993)K5903021 MDSC-2226 01/03/2013
