Filter
Top Products
PERIODIC MAINTENANCE AND ADJUSTMENT
7-14
7
4. Remove the engine oil filler cap
and drain bolt to drain the oil from
the crankcase.
TIP
Skip steps 5–7 if the oil filter cartridge is
not being replaced.
5. Remove the oil filter cartridge with
an oil filter wrench.
TIP
An oil filter wrench is available at a
Yamaha dealer.
6. Apply a thin coat of clean engine
oil to the O-ring of the new oil filter
cartridge.
TIP
Make sure that the O-ring is properly
seated.
7. Install the new oil filter cartridge
with an oil filter wrench, and then
tighten it to the specified torque
with a torque wrench.
1. Engine oil drain bolt
1
1. Engine oil filter cartridge
2. Oil filter wrench
1
2
1. O-ring
U14B10E0.book Page 14 Friday, November 21, 2008 9:38 AM