Filter
Top Products
FOR YOUR SAFETY – PRE-OPERATION CHECKS
5-2
5
Rear brake
• Check operation.
• If soft or spongy, have Yamaha dealer bleed hydraulic system.
• Check brake pads for wear.
• Replace if necessary.
• Check fluid level in reservoir.
• If necessary, add recommended brake fluid to specified level.
• Check hydraulic system for leakage.
7-24, 7-25
Clutch
• Check operation.
• Lubricate cable if necessary.
• Check lever free play.
• Adjust if necessary.
7-23
Throttle grip
• Make sure that operation is smooth.
• Check cable free play.
• If necessary, have Yamaha dealer adjust cable free play and lubricate cable and
grip housing.
7-20, 7-29
Control cables
• Make sure that operation is smooth.
• Lubricate if necessary.
7-28
Drive chain
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
7-26, 7-28
Wheels and tires
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
7-20, 7-23
Brake and shift pedals
• Make sure that operation is smooth.
• Lubricate pedal pivoting points if necessary.
7-29
Brake and clutch levers
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
7-30
Sidestand
• Make sure that operation is smooth.
• Lubricate pivot if necessary.
7-30
ITEM CHECKS PAGE
U14B10E0.book Page 2 Friday, November 21, 2008 9:38 AM