Filter
Top Products
INSTRUMENT AND CONTROL FUNCTIONS
4-9
4
der, the split times are shown from
the fastest to slowest (i.e., F01,
F02, F03, F04).
● Push the “RESET” button for at
least one second to reset all the re-
corded times for the selected split
time history.
4. Push the “SELECT” button for at
least one second to cancel the split
time history and return to the time
measurement.
Odometer, tripmeter, instantaneous
fuel consumption and average fuel
consumption modes
Push the “SELECT” button to switch
the display between the odometer
mode “ODO”, the tripmeter modes
“TRIP 1” and “TRIP 2”, the instanta-
neous fuel consumption mode “km/L”,
“L/100 km” or “MPG”, and the average
fuel consumption mode “AV_ _._
km/L”, “AV_ _._ L/100 km” or “AV_ _._
MPG” in the following order:
ODO → TRIP 1 → TRIP 2 → km/L,
L/100 km or MPG → AV_ _._ km/L,
AV_ _._ L/100 km or AV_ _._ MPG →
ODO
If the fuel level warning light comes on
(see page 4-3), the display automatical-
ly changes to the fuel reserve tripmeter
mode “TRIP F” and starts counting the
distance traveled from that point. In that
case, push the “SELECT” button to
switch the display between the various
tripmeter, odometer, instantaneous fuel
consumption and average fuel con-
sumption modes in the following order:
TRIP F → km/L, L/100 km or MPG →
AV_ _._ km/L, AV_ _._ L/100 km or
AV_ _._ MPG → ODO → TRIP 1 →
TRIP 2 → TRIP F
To reset a tripmeter, select it by push-
ing the “SELECT” button, and then
push the “RESET” button for at least
one second.
If you do not reset the fuel reserve trip-
meter manually, it resets itself automat-
ically and the display returns to the prior
mode after refueling and traveling 5 km
(3 mi).
Instantaneous fuel consumption mode
1. Odometer/tripmeter/fuel reserve tripmeter/in-
stantaneous fuel consumption/average fuel
consumption
1
1. Instantaneous fuel consumption
1
U14B10E0.book Page 9 Friday, November 21, 2008 9:38 AM