Filter
Top Products
8-7
To close
Lower the hood slowly to its original position,
and then hook the hood latches.
Secure projections
1
on the underside of the
hood into slots
2
on the back of the instru-
ment panel. Secure slots
3
on the side of the
hood around projections
4
on the frame.
1. Projection (× 2) 2. Slot (× 2)
3. Slot (× 2) 4. Projection (× 2)
CAUTION:
_
●
Make sure that all cables and wires
are in place when closing the hood.
●
Do not drive the vehicle with the hood
open, unlatched, or removed.
_
U5UG12.book Page 7 Thursday, June 23, 2005 9:02 AM