Filter
Top Products
8-22
3. Install the spark plug and tighten it to the
specified torque.
NOTE:
_
If a torque wrench is not available when you
are installing the spark plug, a good estimate
of the correct torque is 1/4 to 1/2 turn past fin-
ger tight. Have the spark plug tightened to the
specified torque as soon as possible.
_
4. Install the spark plug cap.
5. Lower the cargo bed.
EVU00762
Cleaning the air filter elements
Cleaning the intake duct air filter element
1. Remove the air intake duct grill by remov-
ing the quick fastener screws.
1. Quick fastener screw (× 4)
2. Air intake duct grill
Tightening torque:
Spark plug:
17.5 Nm (1.75 m·kgf, 12.7 ft·lbf)
U5UG12.book Page 22 Thursday, June 23, 2005 9:02 AM