Filter
Top Products
8-11
6. Apply a light coat of engine oil to the
O-ring of the new oil filter cartridge.
NOTE:
_
Make sure the O-ring is seated properly.
_
1. O-ring
7. Install the new oil filter cartridge with an
oil filter wrench, and then tighten it to the
specified torque with a torque wrench.
1. Oil filter cartridge 2. Torque wrench
8. Install the engine oil drain bolt, and then
tighten it to the specified torque.
9. Add the specified amount of recommend-
ed engine oil, and then install the engine
oil filler cap and tighten it.
Tightening torque:
Oil filter cartridge:
17 Nm (1.7 m·kgf, 12 ft·lbf)
Tightening torque:
Engine oil drain bolt:
30 Nm (3.0 m·kgf, 22 ft·lbf)
U5UG12.book Page 11 Thursday, June 23, 2005 9:02 AM