Filter
Top Products
8-8
EVU00691
Console
To remove
1. Remove the seats. (See page 4-15 for
seat removal and installation proce-
dures.)
2. Remove the parking brake lever boot.
3. Pull the console upward (the drive select
lever boot will come loose).
1. Console
To install
1. Place the console in its original position.
2. Install the parking brake lever boot.
3. Install the seats.
CAUTION:
_
●
When installing the console, be sure
not to pinch the cables or wires.
●
Make sure that the groove at the bot-
tom of the parking brake lever boot
and the drive select lever boot fits se-
curely around the edge of the hole in
the console.
_
EE.book Page 8 Friday, July 22, 2005 4:26 PM