8-26
9. Thoroughly apply Yamaha foam air filter
oil or other quality liquid foam air filter oil
(not spray type) to the air filter element.
NOTE:
_
The air filter element should be wet but not
dripping.
_
10. Pull the air filter element over its frame.
11. Install the air filter element.
12. Install the air filter case cover by hooking
the holders onto the air filter case.
13. Install the console.
14. Install the seats.
NOTE:
_
The air filter element should be cleaned every
20–40 hours. It should be cleaned and lubri-
cated more often if the vehicle is operated in
extremely dusty areas. Each time air filter ele-
ment maintenance is performed, check the air
inlet to the air filter case for obstructions.
Check the air filter element rubber joint to the
carburetor and manifold fittings for an airtight
seal. Tighten all fittings securely to avoid the
possibility of unfiltered air entering the engine.
_
EE.book Page 26 Friday, July 22, 2005 4:26 PM