Filter
Top Products
4-21
EVU00360
Front and rear shock absorber adjustment
The spring preload can be adjusted to suit the
operating conditions.
You can reduce preload for a softer ride, or in-
crease preload if frequent bottoming occurs.
CAUTION:
Frequent or severe bottoming can cause
increased wear or damage to the vehicle.
Adjust the spring preload as follows.
To increase the spring preload, turn the ad-
justing ring in direction
a
.
To decrease the spring preload, turn the ad-
justing ring in direction
b
.
1. Spring preload adjusting ring
2. Position indicator
NOTE:
_
A special wrench can be obtained at a
Yamaha dealer to make this adjustment.
_
Standard position: B
A- Minimum (soft)
E- Maximum (hard)
EE.book Page 21 Friday, July 22, 2005 4:26 PM