Filter
Top Products
8-25
EBU14711
Parking brake adjustment
Parking brake adjustment may be required if
the parking brake does not hold properly. The
cable length
A
should be adjusted to 64–
68 mm (2.52–2.68 in).
1. Locknut 2. Adjusting bolt
A. Cable length
1. Release the parking brake by moving the
parking brake lever to the right.
2. Fully loosen the locknut and the adjusting
bolt at the rear brake caliper.
3. Loosen the locknut on the brake cable.
4. Turn the adjusting nut on the brake cable
in direction
a
to increase the cable
length or in direction
b
to decrease the
cable length.
1. Locknut 2. Adjusting nut
U5YT10.book Page 25 Friday, December 12, 2003 2:32 PM