Filter
Top Products
8-8
11. Add the specified amount of the recom-
mended engine oil, and then install and
tighten the engine oil filler cap.
CAUTION:
_
●
In order to prevent clutch slippage
(since the engine oil also lubricates
the clutch), do not mix any chemical
additives. Do not use oils with a diesel
specification of “CD” or oils of a high-
er quality than specified. In addition,
do not use oils labeled “ENERGY
CONSERVING II” or higher.
●
Make sure that no foreign material en-
ters the crankcase.
_
12. Start the engine, and then let it idle for
several minutes while checking it for oil
leakage. If oil is leaking, immediately turn
the engine off and check for the cause.
13. Turn the engine off, and then check the
oil level and correct it if necessary.
Recommended oil:
See page 10-2.
Oil quantity:
Without oil filter element replacement:
2.50 L (2.20 Imp qt, 2.64 US qt)
With oil filter element replacement:
2.60 L (2.29 Imp qt, 2.75 US qt)
U5YT10.book Page 8 Friday, December 12, 2003 2:32 PM