Filter
Top Products
8-43
3. Remove the defective bulb from the
headlight unit by pulling it out.
4. Install a new headlight bulb into the head-
light unit by aligning the projection on the
bulb with the groove in the headlight unit.
1. Do not touch the glass part of the bulb.
WARNING
POTENTIAL HAZARD
A headlight bulb is hot when it is on and
immediately after it is turned off.
WHAT CAN HAPPEN
You can be burned, or a fire could start
if the bulb touches something flamma-
ble.
HOW TO AVOID THE HAZARD
Wait for the bulb to cool before touching
or removing it.
U5YT10.book Page 43 Friday, December 12, 2003 2:32 PM