Filter
Top Products
8-3
NOTE:
@
Brake fluid replacement:
1. When disassembling the master cylinder or caliper cylinder, replace the brake fluid.
Normally check the brake fluid level and add the fluid as required.
2. On the inner parts of the master cylinder and caliper cylinder, replace the oil seals
every two years.
3. Replace the brake hose every four years, or if cracked or damaged.
@
∗
Primary and second-
ary clutches
Check engagement and shift
speed.
Adjust if necessary.
●
Whenever operating elevation is changed.
Inspect sheaves for wear/
damage.
Inspect weights/rollers and
bushings for wear-for primary.
Inspect ramp shoes/bushings
for wear-for secondary.
Replace if necessary.
●
Lubricate with specified
grease.
●
∗
Steering column
bearing
Lubricate with specified
grease.
●
8-29
∗
Ski and front
suspension
Lubricate with specified
grease.
●
8-29
∗
Suspension
component
Lubricate with specified
grease.
●
8-29
∗
Parking brake cable
end and lever end/
throttle cable end
Lubricate with specified
grease.
●
8-29
Check cable damage.
Replace if necessary.
●
Shroud latches
Make sure that the shroud
latches are hooked.
●
5-9
Fittings and fasteners
Check tightness.
∗
Repair if necessary.
●
6-9
Tool kit and recom-
mended equipment
Check for proper placement.
●
6-9
Item Remarks
Pre-
operation
check
(Daily)
Initial
1 month
or
800 km
(500 mi)
(40 hr)
Every
Page
Seasonally
or
3,200 km
(2,000 mi)
(160 hr)
∗
It is recommended that these items be serviced by a Yamaha dealer.
E_8DG.book Page 3 Friday, June 29, 2001 4:20 PM