Filter
Top Products
7-12
ESU00135
Driving
WARNING
@
Be sure to read the “SAFETY INFORMATION” and
“Riding your snowmobile” sections carefully before
operating the snowmobile.
@
NOTE:
@
Make sure that the engine is warmed up enough before
riding.
@
For MM600 / SX600
1. Release the parking brake by moving the parking
brake lever to the right.
2. Press the throttle lever slowly to move the snowmo-
bile.
3. Turn the handlebar in the desired direction.
4. Squeeze the brake lever to stop the snowmobile.
5. Apply the parking brake by moving the parking brake
lever to the left.
For VT600 / VX600ER
1. Select the desirable operating position by moving the
drive select lever.
1
Push down
2
“FWD” Forward
3
“REV” Reverse
WARNING
@
●
Make sure that the throttle lever is fully released
and the snowmobile is at a full stop before shift-
ing.
●
Be sure to move the drive select lever to forward
or reverse until it stops completely while the
engine is idling.
●
Make sure that the area behind the snowmobile is
clear before reversing. Watch behind.
●
Reduce speed and avoid sharp turning when
operating the snowmobile in reverse.
@
NOTE:
@
The reverse buzzer beeps while the drive select lever is
in reverse.
@
E_8DG.book Page 12 Friday, June 29, 2001 4:20 PM